Excelitas VTE Series Infrared Emitting Diodes
PART/ VTE3375LA

VTE3375LA - T-1 (3mm) Plastic Package Lensed, 3mW, Beam angle of ±12.5°

The VTE3375LA is a 880 nm GaAlAs Infrared Emitting Diode (IRED) mounted in a long T-1 (3mm diameter) lensed plastic package. With a narrow beam angle of ±12.5°, this IRED is suitable for smoke detection, IR illumination and optical switching applications.

This 880 nm GaAlAs can be operated in DC mode or in pulsed mode. Pulsed mode is used when a higher optical output power is required for certain applications.

Features and benefits:

  • Narrow optical emission bandwidth
  • Approved for smoke detection applications under UL file S3506
  • RoHs compliant

bob投注体育信赖吗应用程序:

  • Smoke detection
  • IR illumination
  • Optical Switching
  • Consumer coin readers
  • Lottery card readers
  • Position sensors
  • Encoders
  • Printers and copiers

Peak Emission Wavelength = 880 nm

Forward Voltage Drop = Maximum 1.8 V at 20 mA Drive Current

Forward Leakage Current = Maximum 10 μA at 0.6 V Forward Voltage

Reverse Leakage Current = Maximum 10 μA at 5 V Reverse Voltage

Irradiance = Minimum 2.0 mW/cm2, Typical 6.0 mW/cm2at 20 mA Drive Current, Test Conditions: Distance = 10.16 mm, Aperture diameter = 2.1 mm

Peak Forward Operating Current (pulsed) = Maximum 1.0 A, 250 μs pulses at 10 Hz

Continuous Operating Current = Maximum 50 mA at 25°C

Half Power Beam Angle = Typical ±12.5° at FWHM

Lead Soldering Temperature = Maximum 260°C, 1.6 mm from the case, maximum 5 seconds

Peak Emission Wavelength = 880 nm

Forward Voltage Drop = Maximum 1.8 V at 20 mA Drive Current

Forward Leakage Current = Maximum 10 μA at 0.6 V Forward Voltage

Reverse Leakage Current = Maximum 10 μA at 5 V Reverse Voltage

Irradiance = Minimum 2.0 mW/cm2, Typical 6.0 mW/cm2at 20 mA Drive Current, Test Conditions: Distance = 10.16 mm, Aperture diameter = 2.1 mm

Peak Forward Operating Current (pulsed) = Maximum 1.0 A, 250 μs pulses at 10 Hz

Continuous Operating Current = Maximum 50 mA at 25°C

Half Power Beam Angle = Typical ±12.5° at FWHM

Lead Soldering Temperature = Maximum 260°C, 1.6 mm from the case, maximum 5 seconds

Download asset:
To download this item, please complete the form below.