VTB8441BH - Si PD, 8mm ceramic, 5.16 mm2, Low Id, IR Filter
The VTB8441BH is a blue enhanced silicon photodiode in a 8mm recessed ceramic package protected with a clear epoxy layer. With a built-in IR rejection filter to limit the response into the visible portion of the spectrum, this photodiode exhibits a very high shunt resistance and a low dark current.
The VTB8441BH Blue-Enhanced Silicon Photodiode provides a 5.16 mm2active area and is primarily intended to be used in photovoltaic mode but may be used with a small reverse bias. This photodiode is also designed to exhibit very high shunt resistance, a characteristic which leads to low offsets when used in high gain trans-impedance op-amp circuits.
Features & Benefits:
- Visible spectral range
- 1%-2% linearity over 7 to 9 decades
- Very low dark current
- Very high shunt resistance
- RoHS compliant
bob投注体育信赖吗应用程序:
- Ambient light sensing
- Light meters
- Flame monitoring
- Photometry
Active area = 5.16 mm2
Short Circuit Current = Minimum 4 µA at 100 fc, 2850 K
Dark Current = Maximum 100 pA at 2 V Reverse Bias
Junction Capacitance = Typical 1.0 nF at 0 V Bias
Spectral Range = 330 nm to 720 nm
Peak Spectral Response = 580 nm
Sensitivity at peak Wavelength = Typical 0.29 A/W
Angular Response = ±50 Degrees at 50% Response
Active area = 5.16 mm2
Short Circuit Current = Minimum 4 µA at 100 fc, 2850 K
Dark Current = Maximum 100 pA at 2 V Reverse Bias
Junction Capacitance = Typical 1.0 nF at 0 V Bias
Spectral Range = 330 nm to 720 nm
Peak Spectral Response = 580 nm
Sensitivity at peak Wavelength = Typical 0.29 A/W
Angular Response = ±50 Degrees at 50% Response