PART/ 1101310-X
E-Beam Supply, Low power, 50mA
The Excelitas E-Gun High Voltage Power Supply is a highly regulated power supply designed for use in an electron-beam system. The supply provides high voltage for the electron beam emitter, filament power and closed-loop emission current control. High frequency power conversion technology is used for all power supply functions. The unit is designed to run continuously at full output.
- The high voltage output of the supply is single-ended, and can be varied from near 0 to negative 125 kV. Maximum emission current is 58.0 mA at full output voltage.
- Emission current regulation is achieved through control of emitter’s filament current. Maximum filament current is 18A into a 1 ohm load.
- The power supply is comprised of a Converter Assembly and a High Voltage Tank Assembly. The High Voltage Tank Assembly is filled with oil for purposes of electrical insulation and cooling.
- Control of the power supply is performed by 15 V or 24 V interface signals supplied by the customer.
- Extensive internal interlocks and diagnostics are incorporated to provide reliable and safe operation, as well as to facilitate installation
- Input Voltage: 208 Vac +/- 10%, 3-phase
- Output voltage : Negative 150kVdc
- Output Current: 58 mA dc
- Filament Power: 18Vdc 18Adc
- 线和负载Regualtion:比+ / - 0.5%
- Operating temperature: 0 to 40 degrees C
- Safety Protection Circuitry: Arc detect, Over voltage and current, Filament over current, Over temperature
- Input Voltage: 208 Vac +/- 10%, 3-phase
- Output voltage : Negative 150kVdc
- Output Current: 58 mA dc
- Filament Power: 18Vdc 18Adc
- 线和负载Regualtion:比+ / - 0.5%
- Operating temperature: 0 to 40 degrees C
- Safety Protection Circuitry: Arc detect, Over voltage and current, Filament over current, Over temperature